Welcome to Nooelec!

Distill:AM Barebones - Broadcast AM Bandstop Filter for Software Defined Radio Applications

Be the first to review this product

NooElec broadcast AM bandstop filter, EMI shielded.

Includes free male SMA-male SMA barrel connector!

SKU: 100757
US$9.95
  • Buy 2 for US$7.95 each and save 21%
  • Buy 10 for US$7.50 each and save 25%
US$9.95
star

Orders usually shipped in 1 business day!
Read more...

star

Free shipping, always.
For orders over $50. Any order, anywhere.

star

Smile & relax.
30-day return policy on nearly everything in our store.

Share This



Description

Details

A high-quality, high-performance bandstop filter designed for software defined radio (SDR) applications. Designed and manufactured by NooElec in the United States.

Broadcast AM can be particularly problematic due to the high-powered transmitters used for broadcasting in some areas. These signals can overload the front end of an SDR, causing imaging and a number of other issues. As such, Distill:AM makes a great companion to our Ham It Up series of HF upconverters.

We designed Distill:AM to provide sufficient attenuation for broadcast AM frequencies (>40dB typical) while ensuring adjacent bands, such as 160m, are minimally affected. The -3dB rolloff of the filter is 350kHz and 1900kHz. Minimal out-of-band insertion loss means the filter can stay in place for most any application, though we do recommend removing Distill:AM from your setup when not listening to HF frequencies. As a true bandstop filter, you are able to pass-through DC (bias power) when it is required.

DC current handling is 250mA (min), and the maximum recommended signal level is +18dBm (5Vp-p), so there is no issue using the filter for higher-power applications. Typical performance characteristics can be found on the downloads tab of the product page on our website.

Distill:AM has its filter circuitry fully shielded with an EMI frame, and has its front end protected by an ESD diode meant for RF applications.

2 mounting holes are available on the PCB for various mounting options, and the SMA hardware (washer and nut) is included.

Additional Info

Additional Info

SKU 100757
UPC N/A

Reviews

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Downloads

You may also be interested in the following product(s)