Welcome to Nooelec!

Balun One Nine - Tiny Low-Cost 1:9 HF Antenna Balun

Tiny 1:9 balun meant for attaching long wire antennas to Ham It Up, but very handy on the bench for all sorts of applications.
SKU: 100652
US$14.95
US$14.95
 

star

Orders usually shipped in 1 business day!
Read more...

star

Free shipping, always.
For orders over $100. Any order, anywhere.

star

Smile & relax.
30-day return policy on nearly everything in our store.

Share This



Description

Details

Meet 'Balun One Nine', a small, cost-effective balun. An excellent way to attach a long wire antenna to the Ham It Up, this 1:9 balun has an SMA output port and high-quality spring-type terminal block input for your coax.

Balun One Nine includes an AntennaGuard varistor on the input, protecting your SDR setup from spurious ESD. The ESD protection is excellent--it passes IEC61000-4-2, an 8kV contact discharge test, with a response time of just 300ps.

At 39.2mm x 13.0mm in total size (including connectors!) this balun was designed to be light in weight and light on your wallet.

Very low insertion loss of -1.3dB (typical), with a maximum input power of +28dBm. Designed primarily for 160m-6m amateur bands, but specifications are accurate to frequencies up to 90MHz+.

Additional Info

Additional Info

SKU 100652
UPC No

Reviews

Great Solution For MF-HF ReceptionReview by gccradioscience
Quality
Performance
Value
This is a great solution for MF-HF reception. When I did the test, the results were good even inside a first floor apartment. The first test I did was using it with a AM loop antenna and it pulled in some of the local AM stations. It does somewhat, but will be better outdoors for LW at least around 150 kHz to 520 kHz using a long wire or loop antenna. The second test was I built a medium sized delta loop antenna, and it pulled in some stations during early in the morning before sunrise. I tried the dipole configuration which was 2 long wires and the results was noisy, but believe me, it will be better when you place this balun outside your home in a sealed up container connected to 1 of the 3 types of antennas that you can build yourself. Also your communications receiver could benefit from this balun for great reception using the required adapter that you need to connect your cable to your receiver. Remember always ground your antennas for best low frequency and also use a lightning arrestor for bleeding off static dischages. NOTHING will survive a direct hit, so make sure that you disconnect and ground your outdoor antennas and also refrain from using any kind of wire or whip antenna during a electrical storm. (Posted on 7/10/2016)
Huge improvement over connecting the antenna without itReview by Jay
Value
Quality
Performance
Lowered my noise floor quite a bit vs. connecting a long-wire directly to the unit with earth ground. Also gave excellent performance with a 300-ohm twin-lead folded dipole. (Posted on 12/28/2014)

Write Your Own Review

Only registered users can write reviews. Please, log in or register

Downloads

You may also be interested in the following product(s)

HackRF One: Configurable Bundle

HackRF One: Configurable Bundle

1 Review(s)

From: US$350.50

To: US$754.41

HackRF One: Configurable HF Bundle

HackRF One: Configurable HF Bundle

From: US$381.60

To: US$676.25

HF Bundle: NESDR SMArt

HF Bundle: NESDR SMArt

From: US$84.95

To: US$224.90

HF Bundle: NESDR SMArt XTR

HF Bundle: NESDR SMArt XTR

From: US$89.95

To: US$229.90